Frequently Asked Questions

$150.00 for the first hour
$95.00 for every hour after
Plus any parts and material
$142.50 for After Hours (5:00 pm – 7:00AM)

Of course! Click HERE and answer a few quick questions and we will be happy to provide you with an estimate.

(Form should include:
What room?
What is the project (eg: bathroom renovation, kitchen alterations, new furnace)
When do you want to start?
When do you want the project to be completed?
Will Viking be supplying fixtures and products?
Do you have blueprints? (Attach them if possible, otherwise email them here office@vikingmechanical.ca)

Absolutely, however please be aware that because Viking is not supplying the products, we do not warranty the product.  So should the tap, leak or product fail, there will be another charge for Viking to come out.  Should there be a problem with the workmanship (tap is loose etc.) they of course Viking will come out to remedy the issues at no extra charge.

Depends on the product as all manufactures very on the warranty they provide.  However if a product that Viking installed is faulty due to our workmanship, Viking absolutely wants to make it right, and provides a one year warranty on workmanship.

Larger installations such as furnaces, boilers and more, come with a one year parts and labour warranty.

Please note than sewer drain cleaning and hydro scrubbing cannot be warrantied as Viking has no control of what is poured down the drain after we leave, or if the roots grow back or if the line collapses.

Viking carries Trane, Navien, Moen, Delta, Pfister, Goodman, American Standard, Crain and MORE!! If there is a specific brand that you would prefer to have in your home, let Viking know and we can accommodate you and your home!

Viking is happy to service a wide range of products and can work on most.

Viking tries to keep a wide variety or parts and pieces to service its customers.  However there are so many brands and moving parts that it is impossible to carry everything and sometimes a trip to the wholesale is required.  When this happens the cost of the trip to the wholesale is passed to the customer as Viking is required to pay its employees for the time spent driving and waiting in line and the reason Viking is at the wholesale is for the customer and their requirements.

Designed to provide maximum heat with minimum fuel usage. And they think for themselves. Key furnace control functions are integrated into one microelectronic system that monitors the thermostat and gas valve, ensuring precise temperature control.

Our company installs Trane and Goodman furnaces. There is different price points and options available. We try to match the best furnace for your home as well as your budget. However, if you are a deep diver who loves to research your option and you find a furnace that you have to have, we can of course accommodate your choice.

Typically a furnace replacement will take between one to two days, however the scope of work involved will determine the length of time of the install.

It is recommended that at least every year you have someone come inspect and perform service. This helps keep your furnace in proper working order and can make sure there are no sudden break downs during the cold winter months. During the inspection the service tech can give you preventative maintenance tips as well as let you know if a motor or control board should be replaced to ensure proper function to give you peace of mind

You should change the furnace filter every three months.  This helps keep the air going into the furnace clean and keeps the furnace running properly.

Fun Fact: Not changing the furnace filter can void your furnace warranty due to the fact that proper maintenance is not being done.

Connected to the inside cooling coil, the compressor pumps refrigerant back and forth, extracting heat and moisture from the indoors. It transfers the heat to the outdoors. Warm indoor air is blown over the indoor cooling coil, then is cooled and distributed throughout your home.

All air conditioners are sized to keep your home comfortable, which is typically 21C

• In the summer, place the system switch on COOL, and the fan switch on AUTO. Then set the temperature by using the indicator on the thermostat control. Now your system will cool your house whenever the indoor temperature climbs above the thermostat setting. It will shut off when the desired room temperature is reached.
• In the winter, when the system switch is on HEAT, the system will operate whenever the room temperature falls below the temperature setting. Once the desired temperature is reached, the system will shut off.

When your system circulates and filters the air in your home, dust and dirt particles build up on the filter. Excessive accumulation can block the airflow, forcing the unit to work harder to maintain desired temperatures. The harder you’re unit works, the more energy it uses and if the filter is not changes, the blocked air flow can shut your system down and disable it from starting back up.

Clean or replace your filter a least once a month during seasons when the unit runs more often, some systems as much as twice a month. When replacing your filter(s), always use the same size and type that was originally supplied. Filters are available from your dealer. Where disposable filters are used, they must be replaced every month with the same size as originally supplied.

A basic service call is $150.00 for the first hour and then $95.00 every hour after, plus the cost of parts and material. But if you’re doing a bathroom renovation we would be more than happy to give you an estimate!

We have specials from time to time on hot water heater and on fixtures!! Just call and ask!

This means that the Tbolts on the toilet are also loose and they simply need to be tightened.

For basic plumbing work such as tap or toilet replacement there is no need for a permit. However a larger job such as ground work alterations would require a permit. Not to worry! Should a permit be required we will let you know.